Spool tool

Build a tangle-free cradle for binding and bungee.

Marine Fabricator | January 2011

from Keith Purves

Problem

Narrow goods, like binding, bungee and line, sold on spools, can be difficult to work with, and can tangle while working.

Solution

Build a simple cradle out of plastic or plywood to hold various size spools.

Process

• Cut cradle pieces to the size and shape, as shown.
• Glue and clamp pieces together.
• Secure with screws.
• Use 5/16-inch threaded rod (available from hardware store) for the axle.
• Thread a nut and washer onto one end of the rod.
• Use a screw and washer to secure a small loop of bungee cord to hold axle in place.

Tips

• Measure various-sized spools, and adjust the cradle size to meet specific needs.
• Staple a piece of non-skid shelf liner to the bottom of the cradle to help keep it in place.

Keith Purves is the owner of Riverside Covers in Ft. Myers, Fla.

Send us a description and photos of a time-saving tool that you created from scratch in your shop. If it runs in the magazine, we'll pay you $25. Send info to cptschida@ifai.com.

Comments

There are not yet any comments.
You can submit a comment using the form below.