MFA member project wins Award of Distinction

Award of Distinction | Canvas Innovations | Holland, Mich.

Share This Article

  • Digg
  • Facebook
  • Google Bookmark
  • StumbleUpon
  • Technorati
  • Twitter


This 211 Liberator was due for a facelift even before it was torn up by a raccoon while in storage. The customer wanted the new upholstery to be different than the standard Four Winns boat because he was tired of everyone comparing his Liberator to everyone else’s. The customer had some designs in mind and we put it together.

We took the graphic from the side of the boat and enlarged it. We then hand cut the 211 and sewed it into the sundeck. The color scheme complements the exterior and carries throughout the exterior. A gray hammered vinyl sets off the smooth vinyl. Since the boat is an older model there was a lot of extra work with rusted bolts and t-nuts. We replaced some rotten wood. Refitting and reinstalling was challenging, but it all came together nicely.

The result is a “show piece” that the customer had hoped for. The custom 211 Liberator label on the sundeck adds the extra flash the customer required.


There are not yet any comments.
You can submit a comment using the form below.

Submit a Comment

Required. Will appear next to your comment.
Required. Will not be displayed on site or used to send unsolicited messages.
If applicable. A link to your site will appear with your comment.
Optional. Will appear in bold type above your comment.