Complete cover protects boat during travel and storage

Canvas Experts Inc., Ocean City, Md.

Marine Fabricator | March 2009

Share This Article

  • Del.icio.us
  • Digg
  • Facebook
  • Google Bookmark
  • StumbleUpon
  • Technorati
  • Twitter

Tags

Project data

Designer: David Taylor

Fabricator: David Taylor

Project manager: David Taylor

Installers: David Taylor, Marty Taylor

Materials used: Sauleda S.A. supplied by Covin Sales Inc., Tenara 2800 denier style supplied by Komar Alliance, 2-inch polyester webbing supplied by Eastco Industries, European braid binding and Canton fabric supplied by Tri Vantage

This project, which won an Award of Excellence in the full covers 27 feet and up category of the 2009 MFA Awards, featured a full complete cover to protect the boat during travel and storage. Sixteen templates were patterned to create this job. It took nine and a half hours to pattern and it took more than 80 hours to sew. All edges of acrylic fabric were covered with an acrylic braid binding so that a soft edge would touch the boat. Canton fabric was used on anything that needed protection from the acrylic fabric.

Project data

Designer: David Taylor

Fabricator: David Taylor

Project manager: David Taylor

Installers: David Taylor, Marty Taylor

Materials used: Sauleda S.A. supplied by Covin Sales Inc., Tenara 2800 denier style supplied by Komar Alliance, 2-inch polyester webbing supplied by Eastco Industries, European braid binding and Canton fabric supplied by Tri Vantage

Comments

There are not yet any comments.
You can submit a comment using the form below.

Submit a Comment

Required. Will appear next to your comment.
Required. Will not be displayed on site or used to send unsolicited messages.
If applicable. A link to your site will appear with your comment.
Optional. Will appear in bold type above your comment.