Tight-fit cover offers wind resistance and easy installation

Mike’s Marine Custom Canvas, Virginia Beach, Va.

Share This Article

  • Del.icio.us
  • Digg
  • Facebook
  • Google Bookmark
  • StumbleUpon
  • Technorati
  • Twitter


The cover needed to fit tight for wind resistance and trailering, yet install easily onto the boat while it is on the lift and on the trailer. An access zipper is provided at the stern for easy access without removing the cover. Suction cups are attached for pre-positioning the cover during installation, preventing the wind from blowing it around. Quick-release buckle straps are used at strategic locations to install the cover to the boat easily and securely. This project won a 2010 MFA Outstanding Achievement Award in the full covers 27 feet and up category.


There are not yet any comments.
You can submit a comment using the form below.

Submit a Comment

Required. Will appear next to your comment.
Required. Will not be displayed on site or used to send unsolicited messages.
If applicable. A link to your site will appear with your comment.
Optional. Will appear in bold type above your comment.