Helm enclosure project brings new forward and aft biminis

Admiral Marine Canvas, Baltimore, MD.

Marine Fabricator | March 2010

Share This Article

  • Del.icio.us
  • Digg
  • Facebook
  • Google Bookmark
  • StumbleUpon
  • Technorati
  • Twitter

Tags

Project data

Designer: Edward Kime

Fabricators: Edward Kime, Mike Varga

Project manager: Edward Kime

Installers: Edward Kime, Mike Varga

Materials used: Sunbrella Supreme, Sunbrella, Sattler Premium, YKK #10 zippers, DOT stainless hardware, Costa Track, Sunbrella 3/4-inch binding, Acrylic 80g glass, Tenara heavy thread, Velcro brand poly Velcro, YKK zipper lanyards; supplied by Manart Hirsch and Tri Vantage

The aim of this project, which won a 2010 MFA Award of Excellence in the rigid enclosures category, was to complete an EZ2CY helm enclosure with new forward and aft biminis and EZ2CY aft enclosure with a new windshield cover. There are two main forward facing windows with a vertical centerline zipper separating the two panels. Each panel has half of the old u-zipper design.

Project data

Designer: Edward Kime

Fabricators: Edward Kime, Mike Varga

Project manager: Edward Kime

Installers: Edward Kime, Mike Varga

Materials used: Sunbrella Supreme, Sunbrella, Sattler Premium, YKK #10 zippers, DOT stainless hardware, Costa Track, Sunbrella 3/4-inch binding, Acrylic 80g glass, Tenara heavy thread, Velcro brand poly Velcro, YKK zipper lanyards; supplied by Manart Hirsch and Tri Vantage

Comments

There are not yet any comments.
You can submit a comment using the form below.

Submit a Comment

Required. Will appear next to your comment.
Required. Will not be displayed on site or used to send unsolicited messages.
If applicable. A link to your site will appear with your comment.
Optional. Will appear in bold type above your comment.